SPECIFICATIONS

 

 

Hign-concerned Chemical: None

HANGKAI 18HP 2-Stroke Outboard Motor Boat Engine Water Cooling & CDI Short Shaft

Specifications

Material: Aluminum Alloy

Color: Black

Surface Treatment: Spray Paint

Assembly Required: No

Number of Items: 1

Engine: 2-stroke 18hp

Displacement: 246cc

Gear Ratio: 2.08(27:13)

Number of Cylinders: 2

Max. Output: 13.2KW

Max. Speed: 4500-5500r/Min

Noise: About 80DB             

Gear Positions: F-N-R

Ignition System: CDI

Cooling System: Water-cooling

Control System: Tiller Control

Starting System: Manual Start

Gasoline: No.92 Lead-freeGasoline

Fuel Type: Mixed Oil (50 Gasoline: 1 2-stroke Engine Oil)

Trim And Tilt System: Manual Tilt

Fuel Tank Capacity: 24L/6.34gal

Fuel Consumption Rate: 4.5L/1.18gal/h

Bore*Stroke: 5.6*5cm/2.2*1.97in

Propeller Diameter: 20cm/8in

Joystick Length: 36cm/14.17in

Handle Length: 14cm/5.51in

Fixed Screw Spacing: 16cm/6.3in

Oil-pumping Pipe Length: 2.9m/9.5ft

Adaptive Transom Plate Height: ≤44cm/17.32in

Gross Weight: 46.05kg/101.5lbs

Net Weight: 28.9kg/63.7lbs

Product Size: 103*47*32cm/40.5*18.5*12.6in

Package Size: 119*71*40cm/46.8*28*15.74in

 

Package Included

1x Outboard Motor

1x External Fuel Tank

1x Oil-pumping Pipe

1x Flameout Rope

1x Tool Kit

1x English Manual

All Accessories for Assembly

 

Notes

1. Please carefully read the manual and strictly follow the precautions to have a better experience.

2. Please measure the height of your boat before purchasing to ensure suitability for this product.

3. Please start the motor in the water. If the motor stops circulating water, please stop using it immediately and check the impeller of the water pump to see if the water outlet is blocked.

4. Please note that this product should use a mixture of two-stroke engine oil and 92 # unleaded gasoline. The running-in period of the new machine is 10 hours, during which the fuel ratio is 30L (7.93 gal) of gasoline to 1L (0.26 gal) of engine oil. After 10 hours, the ratio is 50 liters (13.21 gallons) of gasoline to 1 liter (0.26 gallons) of oil.

5. Please note that the emergency shutdown rope should be inserted when the outboard motor is started, and the other end should be wrapped around your wrist or belt.

6. Please do not drive too fast during the running-in period. After the running-in period, the gear oil needs to be replaced, and the second replacement time is about 100 hours or 6 months later.

7. Please do not leave this product outside until the cooling water is completely used up. Otherwise, water will enter the cylinder through the exhaust port, leading to engine failure. After cruising in seawater or turbid water, please clean the outboard motor with fresh water and cool the water channel with fresh water. The engine should be stored in a dry and well-ventilated place, and avoid direct exposure to sunlight.

8. If not in use for a long time, please thoroughly clean the gasoline in the fuel tank.

9. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.